Cisco vpn validating identity
Not sure if relevant, but there is also a router in bridge mode the EFM provider installed the 1812 connects through. crypto isakmp policy 3 encr aes authentication pre-share group 5 lifetime 3600 crypto isakmp key PRESHAREDKEY address 18.104.22.168 no-xauth ! crypto ipsec transform-set myset esp-des esp-md5-hmac crypto ipsec transform-set myset1 esp-des esp-md5-hmac crypto ipsec transform-set myset2 esp-3des esp-md5-hmac crypto ipsec transform-set myset3 esp-aes 256 crypto ipsec transform-set myset4 esp-aes 256 esp-md5-hmac crypto ipsec transform-set myset5 esp-3des esp-sha-hmac mode transport ! interface Fast Ethernet1 no ip address shutdown duplex auto speed auto !
Now the ISAKMP is connected *Apr 2 .198: ISAKMP:(2125): Old State = IKE_QM_READY New State = IKE_QM_READY *Apr 2 .246: ISAKMP (25): received packet from 22.214.171.124 dport 500 sport 500 Global (I) QM_IDLE *Apr 2 .246: ISAKMP: set new node -505694825 to QM_IDLE *Apr 2 .246: crypto_engine: Decrypt IKE packet *Apr 2 .246: crypto_engine: Generate IKE hash *Apr 2 .246: ISAKMP:(2125): processing HASH payload. no spanning-tree vlan 1 no spanning-tree vlan 2 username ADMINUSERNAME password 0 ADMINPASSWORD archive log config hidekeys ! crypto dynamic-map dynmap 10 set transform-set myset reverse-route ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address respond crypto map clientmap 1 ipsec-isakmp set peer 126.96.36.199 set security-association lifetime seconds 28800 set transform-set myset myset1 myset2 myset3 myset4 myset5 match address 110 crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! interface BRI0 no ip address encapsulation hdlc shutdown !
VPN authentication methods include: To support the widest range of Microsoft client operating systems, use a version of MS-CHAP, PPTP, and MPPE.
Single secrets, such as passwords, can be effective security controls.The challenge is for organizations to harness the benefits that the Internet provides while they maintain necessary levels of data and communication security.Virtual private networks (VPNs) enable organizations to utilize the Internet while helping to limit exposure for data and communication channels; they do this by providing a number of security features, including reliable authentication and encryption mechanisms. line con 0 password CONPASSWORD line aux 0 access-class 4 in line vty 0 4 access-class 1 in exec-timeout 500 0 privilege level 3 password VTYPASSWORD transport input telnet ssh ! None of the transform sets on your router include esp-aes, esp-sha-hmac. While you're at it, unless you really need the others (myset1-5), you might as well take them out.
webvpn context Default_context ssl authenticate verify all ! end I'm suspecting the Access List settings, but again this is identical to 9 other offices, and the network support team who are providing the HUB end have taken a look and the settings are all correct. The log entry says that the hub wants to use a transform set (esp-aes, esp-sha-hmac) that you don't support. COM password 0 PAPPASSWORD ppp ipcp dns request accept crypto map clientmap ! access-list 1 remark IP Addresses Permitted to login via ssh and telnet access-list 1 permit 188.8.131.52 access-list 1 permit 10.1.9.0 0.0.0.255 access-list 1 permit 10.1.1.0 0.0.0.255 access-list 1 deny any access-list 3 remark NTP Server addresses access-list 3 permit X.